Open — responses due 4 Dec 2026 (13 days left) · No Set aside used · Department of the Navy, DoD · Lakehurst, NJ · NAICS 334519 · Solicitation N68335-27-Q-0536
Get the AI read before you spend a day on this package. FedSift pulls out the deal-breakers and key risks, each quoted from the document. Free, no account.
Before you spend a day on this package: FedSift reads every document and pulls out what is being bought, the deal-breakers and the key risks — each quoted from the page it came from. Free, no account needed. The result is shared, so the next reader gets it instantly. With a free account it also builds the full compliance matrix.
Track this solicitation
We'll email you if the response deadline moves, an amendment posts, or new documents are added. It closes 04 December 2026. No account needed — one email, unsubscribe in a click.
Description
REQUEST FOR INFORMATION - SOURCES SOUGHT NAVAL AIR WARFARE CENTER, AIRCRAFT DIVISION LAKEHURST, NJ MORIAH WIND SYSTEM (MWS) THIS IS A REQUEST FOR INFORMATION ONLY. This Request for Information (RFI) is issued pursuant to FAR 15.201(e). This RFI is for information and planning purposes only and does not constitute a solicitation or promise to issue a solicitation in the future. It is a Market Research tool being used to identify potential technologies and eligible firms, of all sizes, prior to determining the method of acquisition and issuance of a solicitation. The Naval Air Warfare Center Aircraft Division (NAWC-AD) Lakehurst is seeking to continue the production of the U.S. Fleet wind systems for program management, production, systems engineering, logistics support and acceptance for the Moriah Wind System (MWS). The MWS program produces multiple configurations and variants of the MWS and associated components. A description of the Moriah Wind System follows: MWS provides digital wind speed and direction information, including crosswind and headwind, that supports decision making for air operations, combat, navigation, tactical planning and firefighting. The MWS replaces legacy Type F Wind Measuring and Indicating and Digital Wind Systems (DWS), providing a single wind measuring system, consistent across all ship classes, Land Based Test Site, and shore stations. MWS consists of the following main parts: Ultrasonic Wind Sensor Unit (WSU) with non-moving parts Wind Processor unit (WPU) consisting of dual redundant processors capable of interfacing with legacy wind and ship systems and Shipboard Local Area Networks (LANs) High-End Display (HED) with full range of available wind information and ship speed/ course data, including the display of Aircraft Recovery Bulletins (ARBs), Launch and Recovery Envelopes (LREs) and Final Course data. The HED is hardwired to one of the WSUs in a safety critical configuration to enable the display of wind data when the WPU or another connecting network is not functioning. HED fits inside an envelope no larger than11.50” high by 18.00” wide by 9.53” deep. This does not include maintenance access, connector access or environmental excursions. HED must be NVD compatible. Low-End Display (LED) with basic wind information and ship speed/course data. LED fits inside an envelope no larger than 7.36” high by 11.10” wide by 6.06” deep. This does not include maintenance access, connector access or environmental excursions. LED must be NVD compatible. The Air Temperature and Humidity Sensor (ATHU) is an accurate self-contained instrument for measuring external air temperature and humidity. The sensor electronics are enclosed in ruggedized stainless-steel housing. The Air Pressure Unit (APU) is an accurate self-contained instrument for measuring external air pressure. The sensor element and all associated electronics to produce a unidirectional serial data interface are housed in a cast aluminum box. The WSUs, HEDs and LEDs are uniform across ship classes, land-based test sites, and shore stations, with the quantity of each item dependent upon ship class/shore location. Every MWS has one WPU with dual-redundant processors, which will differ depending upon ship class and shore station either of which can individually perform all the functions necessary to keep MWS running. The sub-processors communicate with each other directly and periodically to determine functional status and to allow changes in control when a failure is detected. MWS accesses unclassified data only. There is a degree of system-to-system information exchange in MWS. Neither MWS nor its components are connected to the Global Information Grid (GIG). MWS data is output from its WPU in several ways: 1) synchro interfaces to provide wind information to legacy systems (SLQ-32, SPN-46, Integrated Launch and Recovery Television System (ILARTS), and Arresting Gear Crosscheck System); 2) serial and network interfaces for output of wind, navigational and system information to displays; and 3) network interfaces to communicate wind information to other ship systems and MWS displays. Currently, MWS will communicate over Aviation Data Management and Control System (ADMACS) on CVNs, through Digital Multiplex System (DMS) on DDGs and on a MWS controlled network on all other ship classes. Wind data is transmitted in the standard message format and protocol (SMF&P) data format and the National Marine Electronics Association (NMEA) data format. MWS receives the ARBs it displays through ADMACS via Network File System (NFS). MWS displays LREs that are programmed into the HEDs. In order to display ship’s speed and direction, calculate true wind speed and direction, as well as pitch and roll, MWS receives a data packet from Navigation Sensor System Interface (NAVSSI), which contains a host of navigational data, including ship’s positional information. MWS does not use any of this other information, although it must read the entire NAVSSI data packet prior to extracting the data required. The information in this packet is not sensitive unless the information is transmitted off the ship. However, MWS has no mechanism for transmitting data off the ship, nor any requirement to do so. MWS uses strictly defined data types for transmission into and out of the system. This information is limited to either NMEA ASCII strings using checksums to determine data integrity, structured binary data format using checksums to determine data integrity, proprietary DMS Light Internet Protocol (DLIP), and analog synchro resolver output to other ship systems. The data items themselves are confined to information from known systems (as defined in the relevant Interface Requirements Specifications) or is confined to IP addresses and ports specified in the Interface Design Documents (IDD) and the network architecture (ADMACS, DMS or other ship network). The components contain no TELNET or File Transfer Protocol (FTP) capability. Configuration is done via a manual procedure where a MWS cyber accredited laptop is attached to the system components using a serial cable (RS-422) and programming is done via contractor supplied software applications. The processor software was written to run under a tailored Linux Operating System with minimal functionality on an Intel/ARM platform. This operating system consists of a Linux kernel that has been built specifically for use in this environment that will aid security. It contains only those device drivers and services that are relevant to this embedded environment. Software design protects system integrity by the fact that unauthorized personnel do not have the ability to modify the software configuration, data or application. MWS is not designed for use or visibility on the internet and there is no access to the internet. MWS uses UDP/IP & TCP/IP for unicast and multicast communication protocols. NAWC-AD Lakehurst is requesting information from industry for the purpose of identifying qualified contractors interested in producing MWS. The objective of this is to continue production of the following MWS parts, which establish the current MWS configuration baseline: P/N Nomenclature P/N 81164/0200.00 Wind Sensor Unit (WSU) P/N 82374-0200-00 Wind Sensor Unit (WSU) P/N 81161/0200.00/E High End Display (HED) P/N 82371-0200-00-E High End Display (HED) P/N 81162/0200.00/E Low End Display (LED) P/N 82372-0200-00-E Low End Display (LED) P/N 81161/0102.00 HED LED GUI KIT P/N 82371-0102-00 HED LED GUI KIT P/N 81163/0102.00 WPU GUI KIT P/N 81163/0200.00W01 Wind Processor Unit (WPU) V1 P/N 82373-0200-00W01 Wind Processor Unit (WPU) V1 P/N 81163/0200.00W04 Wind Processor Unit (WPU) V3 P/N 82373-0200-00W04 Wind Processor Unit (WPU) V3 P/N 81163/0200.00W05 Wind Processor Unit (WPU) V5 P/N 81163/0200.00W06 Wind Processor Unit (WPU) V6 P/N 82373-0200-00W07 Wind Processor Unit (WPU) V7 P/N PS753 28 VDC Power Supply P/N 81163/0300.00W04 WPU Sub-Processor Unit (SPU) Fiber-optic P/N 82373-0300-00SP WPU Sub-Processor Unit (SPU) Fiber-optic P/N 80980/0101.00 ATHS Mating Kit P/N 81325-0200-00M1 Air Temp & Humidity Sensor (ATHS) P/N 80897/0200.00M1 Air Pressure Sensor (APS) P/N 81163/5100.00W01 WPU Digital to Synchro PCD, 400Hz P/N 81163/5000.00W01 WPU Digital to Synchro PCD, 60Hz P/N QPI-2200-UPS-00 Stand Alone Uninterruptible Power Supply The MWS configuration baseline has been qualified to the System Requirements Specification, MWS, NAWCADLKE-BL13500-MISC-0065 REV A. This effort will also provide for the insertion of technology refreshed components to address obsolescence issues, and to provide backfit kits to apply the same technology refreshed components to deployed systems. Technologically refreshed components must continue to meet the requirements of NAWCADLKE-BL13500-MISC-0065 REV A. The aforementioned NAVAIR Specifications contain technical data whose export is restricted by the Arms Export Control Act (Title 22 U.S.C Sec. 2751 Et. Seq. or Executive Order…
Go deeper on this solicitation
FedSift reads the full solicitation package — every attachment — and pre-extracts the compliance matrix, evaluation factors, key risks, win themes and deal-breakers, each with a verbatim quote and the exact PDF page it came from. It scores the opportunity against your company profile, tells you whether to bid as prime or sub, and ranks teaming partners who could close your gaps.
Source: this notice on SAM.gov. FedSift republishes public federal procurement data and is not affiliated with the U.S. Government. Always confirm dates and requirements against SAM.gov before responding.